Here is a Spooky take on a classic lunch treat! Not only can these be used at a Halloween Part, but a cute lunch time surprise for school during October. While some of the instructions seem self explanatory, we just wanted to show how quick and easy it was to make!
Round Cookie Cutter or Knife
Mini Chocolate Chips
- Use cookie cutter on bread slices to get the top and bottom of your spider body. (Or you can free hand with a knife.)
- Add peanut butter to one, and jelly to the other. We found it best to add the pretzel stick spider legs now instead of sticking them in later on. Place the top down to secure the legs.
- Now all that is left is placing two chocolate chips on top as the eyes! Simple, Easy, Delicious!
Party Planners have numerous ideas for how to decorate the interior of your home for a party, but what about the exterior? What better way for guests to make an entrance, than to have your decked out for the event they are attending! We love the idea of a frame around the door with Tulle and the large masks in the corner. Now, masks that size may need to be ordered online, but you can find smaller ones at your local Halloween Shop or Party Store.
Take your theme colors and wrap them around the door frame for a stunning entry way. Little bits can be added along the sides, kind of like a theater curtain being held to the side with some rope. If you have done any outdoor decorations for Halloween, a themed party, or just because we would love to see and hear about it!
If you are looking for a location for your next party or get together, the B&B Country Garden Inn offers different party packages! Just give us a call today to look into dates and start helping you plan.
A cute, simple craft to add to your Masquerade party is some themed wine glasses! Wine glasses can be picked up at your local Dollar Store, so the cost would be based on how ever many you needed.
Super Glue, Elmer’s Glue
Modge Podge or Sealant Spray
- Draw out different mask designs onto a piece of cardstock and cut them out. Make sure you are making them to fit around the size of the glass. Brush glue onto the masks to add the glitter and let it dry, then add a spot of glue on the back for the feather and allow time to dry.
- Use the brush again to coat anywhere on the wine glass you want glitter and sprinkle it on top. Move the wine glass around and even let it dry upside down to release any loose pieces.
- Super Glue will be needed to attach the cardstock mask to the wine glass, Elmer’s Glue will not stay on the glass. Hold the piece in place until it dries.
- Cover the mask and the areas with glitter with a sealing spray or paint with modge podge to ensure that it will hold in place. Perfect to add as a decoration or toasting!
While there are endless party ideas through out the year, most of them you would think of activities for children. We are also guilty of posting a lot of ideas that revolve around kids or the family unit. October is a wonderful time for Halloween themed parties, as well as Masquerades! You can find a wonderful selection of masks at your local costume shop, or make your own for the event. There is a lot you can do with the themed, specific colors or anything goes. This event is a great for you and your friends, co-workers, etc. The fancy dresses are not needed, everyone can come in costumes with matching masks, or have on their Sunday best, even jeans and t-shirt. Decorate with feathers, beads, other masks around the room, and food that matches the chosen color theme you have gone with.
PS – If you need a place to hold your party, try calling us at the B&B Country Garden Inn (919) 303 – 8003
The best part about this recipe is that you can make an alcoholic and non-alcoholic version depending on what kind of get together you are having! This recipe is called Dragon’s Blood Punch and it will definitely look the part in any of your serving glasses! You just need a bottle of Ginger Ale, Apple Juice, Cranberry Juice and Hawaiian Punch. Add ice cubes and mix all together for a delicious drink. If you are looking to make an adult version, add orange liqueur and berry vodka. Dress it up with some goblets from the Halloween Store or Party City to really make them stand out at any party.
Rice Krispies have made the perfect treat for all ages for many years. How about taking a different twist on a classic by making it fall appropriate?
6 cups Rice Krispies
1/4 cup Butter
1 bag large Marshmallows
Red and Yellow Food Colouring
1/4 cup cooking oil in a small bowl
1. Melt butter in a large pot over low heat. Add the marshmallows and stir until melted and combined together.
2. Add several drops of red and yellow food colouring into the mix and remove from heat. After you get your desired color of orange, add in your rice krispies. Mix well.
3. Coat your hands with the cooking oil so the mixture does not stick to your hands. Roll into small balls and place onto parchment paper. Add oil to your hands after each.
4. Gently press a Rolo into the center top of the balls while they are still warm to make the stem, placing a green m&m next to it on the side as the leaf.
5. Allow to cool until firm.
There are some really iconic characters around Halloween; Vampires, Mummies, Ghosts, Bats, Frankenstein, and Witches! Here is a cute, simple treat idea for your home or office Halloween party. All you are going to need are mini Reese’s candies and pretzel sticks. Unwrap how ever many Reese’s you want or fill up a tray, and flip them upside down. Gently stick the pretzel into the center of the cup and ta-da you have mini witch brooms! A tasty treat of salty and sweet at your next get together.
Pac-Man is one of the most easily recognizable gaming characters across multiple generations. Up until now, all of the DIY costumes we have posted were pretty straight forward. This one is going to be a little more in depth, but the results are worth it!
Spray Paint in Black and Yellow
Hot Glue Gun
Traceable Circle (ex. Hula Hoop)
- Use your large circle to trace 2 patterns onto the cardboard. Make sure to use the straight edge and ruler when adding in the fake mouth so it is realistic. Arm circles can be drawn using your duct tape, just make sure it is big enough for your child’s arm!
- For the connecting center, measure from shoulder to shoulder and then add 1/2″ – 1″ of wiggle room. Cut your connecting center so the cardboard is horizontal. This way it can roll and take shape.
- Once you have your center cut, roll it up so it will take shape easier. Next make a line 1/2″ on each side. Take a blade and make cuts up to that line, bending inward as you go. It also helps to score this line from top to bottom (cut, but not all the way through) so the edges bend easier and make for a cleaner fold/line.
- Begin your assembly by hot gluing and duct taping the pieces together. The mouth section should be made of stiffer card board, so measure and cut that separately.
- Once all of the assembly is complete, it’s time to paint! Spray paint is a nice quick way to do this, and you can learn some tips and techniques from the video below!https://www.youtube.com/watch?v=qB_MtpaMYaY
Leave the black mouth pieces unassembled and spray paint those separately. You can add these once the entire yellow piece is painted and dry.
Sometimes costumes are better when you do them together! This is a great option for a couples costume, friends, or your kids to do together. For this you will need matching set of leggings and plain t-shirt which can be found at Walmart or Amazon, as well as felt in the opposing color (Black if the clothes are white, or white if the clothes are black, or whatever color you want the dots to be really). Cut out the circles and place them ahead of time to know where you want them. Then you can use hot glue to attach them or sew if you are handy with a nail and thread! Super easy and another costume under $20 for Halloween!
There are so many different brands and types of jellybeans out there, but they are always recognizable. This DIY is simple and cost less than $20 to create! Just be careful and stay away from corners and anything sharp, don’t want to lose your beans before the party!
All you need for this costume is a large clear plastic bag and some assorted balloons from your local Walmart or Party City. Cut out holes in the bag for your arms and legs and slip the costume on. Then, fill up the balloons so that they look like large jellybeans and add them into the bag. When it is filled, use a ribbon or rope to tie everything closed and bam! Additional Logo option is completely up to you, but can be printed onto card stock and attached with tape or pins.